802.11 RFID
Tags: 802.11 | rfid | wifi | wireless integration | wireless technology
The numbers 802.11 makes an indication to a ‘family of specifications’ developed by the IEEE (Institute of Electrical and Electronics Engineers, Inc.) for wireless LAN technology. 802.11 specifies an over-the-air interface or a boundary amid a wireless user and a base position or connecting two wireless users.
What is IEEE 802.11 RFID?
IEEE 802.11, the Wi-Fi standard, refers to a set of Wireless LAN/WLAN standards made by the working group 11 of the IEEE LAN/MAN Standards Committee (IEEE 802). The term 802.11x is also used to indicate this set of standards and is not to be misinterpreted for whichever one of its elements or fundamentals. There is no single 802.11x standard. The expression ‘IEEE 802.11’ is also used to refer to the new and original 802.11, which is at present occasionally called “802.11legacy.”
The 802.11 family at present has six over-the-air modulation or inflection techniques that all make use the identical protocol or code of behavior. The most accepted (and creative) techniques are those that are made distinct by the b, a, and g amendments to the unique standard; safety measures were initially incorporated and were afterward improved via the 802.11i amendment. 802.11n is an additional modulation technique that has in recent times been developed; the standard is still under development, while products planned based on draft or sketch versions of the standard are being sold. Further standards in the family unit (c–f, h, j) are service improvements and extensions or rectifications to earlier specifications. 802.11b was the foremost extensively received wireless networking standard, followed by 802.11a and 802.11g.
Some specifications in the 802.11 family are as follows:
802.11
802.11 make an indication to 1 and 2 MB provisions. This may also be treated to as High Rate (HR). 802.11 are applicable to wireless LAN and offers 1 or 2 Mbps transmission in the 2.4 GHz band using either Frequency Hopping Spread Spectrum (FHSS) or Direct Sequence Spread Spectrum (DSSS).
802.11a
802.11a functions on a frequency range of 5GHz rather than that of 2.4Ghz range that 802.11b functions at. The greatest throughput is 54MB and will decline to 6MB as needed. 802.11a is an extension to 802.11 that is put into employment to wireless LANs and offers up to nearly 54 Mbps in the 5GHz band. 802.11a makes use a statistically unrelated Frequency Division Multiplexing Encoding scheme rather than employing FHSS or DSSS.
802.11b
802.11b makes a reference to 11-MB offerings and may also be treated to as High Rate (HR). 802.11b will begin at 11MB and will reduce to 5.5MB, 2MB, and 1MB if required. Coverage or reporting range will lessen as MB goes up. Particular considerations will have to to be prepared to assure stable 11MB coverage. One will require to assure that a site examination is carried out with precise directions and information that 11MB throughput (output relative to input) is necessary. 802.11b is regarded as 802.11 High Rate or Wi-Fi, an addition to 802.11 that is related to wireless LANS and gives up to11 Mbps transmission (a fallback to 5.5, 2 and 1 Mbps) in the 2.4 GHz band. 802.11b uses only DSSS. 802.11b was a 1999 authentication to the innovative 802.11 standard, permitting wireless functionality corresponding to Ethernet.
802.11g
802.11g is applicable to wireless LANs and provides 20+ Mbps in the 2.4 GHz band.
Amendment or Standard
The terms or expressions ‘standard’ and ‘amendment’ are brought into use while denoting the diverse variants of IEEE 802.11. As far as the IEEE is concerned there is only a single ‘standard’ and that is IEEE 802.11. This standard is constantly well run and updated by way of ‘amendments’ such as IEEE 802.11a, IEEE 802.11b etc. every so often a fresh version or adaptation of the IEEE 802.11 standard is created making use of and combining the preceding adaptation of the standard and all amendments in print up to that date. For instance, there is a 2003 version of the standard on hand for buying that integrates the IEEE 802.11a, IEEE 802.11b, and IEEE 802.11d amendments. It is likely that at some point, only this edition will be made obtainable for free download replacing the six year old adaptation of the base standard and the first three amendments. So the accurate phrase for the base standard called ‘802.11 legacy’ on this page would in actuality be 802.11-1999. But on the exterior the working set that brings out the IEEE 802.11, such precision is perhaps needless.
Technorati Tags: